MaxAmps Dual 6000XL 11.1V E-Maxx Brushless ARTR Kit

The ultimate kit for your Traxxas Brushless E-Maxx!  All you need is a power supply for the charger. These packs are NOT for a stock E-Maxx and will only work with brushless upgraded vehicles.

If you’re looking for an insane amount of power, these are the packs for you!

Warning: The E-Maxx Brushless Edition ESC has a soft lipo cutoff as the factory default setting.  This means that it won’t cut the power to your system when the pack voltage reaches the cutoff point. We highly recommend getting a Castle Link Programmer and changing the ESC Auto-Lipo cutoff to 3.4V per cell.  This does NOT mean that it now has a hard-cutoff.  It just means that the soft-cutoff triggers a little sooner to give you time to drive your vehicle back.  This will protect you from over-discharging your lipo pack and voiding your warranty.

Note: Requires E-maxx Tray Expansion Kit (#3927X) to fit. Sold here.

Kit Includes:

Two Lipo 6000XL 3S 11.1V Packs

NEW! Now includes Lipo and LiFePO4/A123 Cycle mode.  Max charge rate has been raised from 10A to 15A per port.

This charger is incredibly versatile and has 8 available modes!

• Charge only mode(SOLO or SYNC)
• Balance Charge mode(SOLO or SYNC)
• Balance only mode (SOLO or SYNC)
• Discharge mode(50W per port w/ 10A max current)
• Lipo & LiFePO4/A123 Storage mode(Allows fast and simple discharge to 60% capacity for proper storage voltage which equals longer battery life)

This charger is capable of balance charging two Lipo packs at once with no additional accessories to purchase. In this case, you can charge 2 separate but similar Lipo or LiFePO4/A123 packs as a single unit in “SYNC” mode to make packs up to 12S at 360W max charge power or you can charge two completely different packs in “SOLO” mode on each port at the same time.

This charger is carefully designed with many built-in safety features such as reverse polarity protection, input voltage error warning, and cell count mismatch warnings for lithium chemistry batteries.

Terminal Capacity Selection (TCS)

Temperature Sensor Port

20 User-definable Memory Positions per port(40 total)